Q: Calculated values – moneo OS – release notes for software version 1.10

As of version 1.10, the Calculated values function in moneo now includes six new arithmetic function blocks to generate even more customised information based on the incoming data.

Question 1

Monitoring table – moneo RTM – release information for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Monitoring table.

Question 2

Dashboard – moneo RTM – release notes for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible on the Dashboard.

A new data visualisation tool is available: the pointer. It visually resembles a measuring device with minimum and maximum values and is particularly suited for indicating speed, pressure, flow, current or acceleration. It is now also the default display tool for this type of data.

Question 3

Analysis – moneo RTM – release information for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in Analysis.

Question 4

Tasks and tickets – moneo RTM – release information for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and they can even be used in Tasks & Tickets for further information purposes without having to be configured in moneo beforehand (this is because the monitoring already takes place in the diagnostic electronics).

Question 5

Calculated values – moneo OS – release notes for software version 1.10

Accepted Answer

Six new arithmetic function blocks

As of version 1.10, the Calculated values function in moneo now includes six new arithmetic function blocks to generate even more customised information based on the incoming data.

Question 6

Connected devices – moneo configure – release information for software version 1.10

Accepted Answer

IO-Link masters with DigitalOut ports now also enable PdOut settings under the Connected devices section in moneo

IO-Link masters with DigitalOut ports now also enable PdOut settings under the Connected devices section in moneo.

List of favourites / view 1 – connected devices in moneo

List of favourites / view 2 – connected devices in moneo

The list of favourites is now available! Devices found via the network search can be added to freely defined lists and then quickly accessed without having to perform another network search.

Connected devices / Dashboard / Better visualisation / Full screen

For better visualisation, the dashboard can now be expanded to full screen size in the connected devices view.

Question 7

edgeConnect – moneo OS – release notes for software version 1.10

Accepted Answer

Cloud connectors – Azure or AWS

The new cloud connectors, which are included as of moneo version 1.10, enable you to send the data available in moneo to the Azure or AWS clouds, thus paving the way for further processing and use of the obtained data or of calculated values.

The Azure IoT Hub or AWS IoT Core can be quickly selected and easily configured via target systems and “Add new target”. The required connector needs to be licensed beforehand:

moneo edgeConnect Azure LIC (QMC133)
moneo edgeConnect AWS IoT LIC (QMC132)

For the purpose of cost optimisation, the frequency per seconds of the data to be sent can now also be set between one second and one hour as of moneo version 1.10 onwards, provided a target system (MQTT or cloud service) is connected and the transmission of a data source activated.

Question 8

Miscellaneous – release notes for software version 1.10

Accepted Answer

As of this version, moneo also supports a light mode in addition to the dark mode

As of this version, moneo supports a light mode in addition to the dark mode. The user can switch between the two modes at any time via the user management.

Question 9

AMS – moneo appliance – release version 1.10

Accepted Answer

With version 1.10, the moneo appliance and underlying operating system are getting the latest security updates.

Local backups can now also be copied to USB devices.

In the AMS network settings in it is now possible to use DNS alias names. moneo can be addressed in the network via the full qualified domain name (FQDN) of the host, for example.

moneo release notes

What’s new in moneo? Click on the tiles to see the new features included in this software release.

Monitoring table

Dashboard

Analysis

Tasks and tickets

Settings and rules

Device management

Calculated values

Connected devices

Saved configurations

Device descriptions

DataScience Toolbox

Raw data recording

AVA wizard

edgeConnect

Miscellaneous

Appliance Management System

More information

moneo: Die IIoT-Software für Industrie und Fertigung

Alle moneo Use cases im Überblick

Das modulare System: moneo