Q: What is the difference between E30446 and EIO330?

E30446 is an inline bluetooth adapter. It is connected between sensor and master and “listens” to the communication. This data is then sent to a smartphone or can be stored. A configuration is not possible. EIO330 is connected to the IO-Link master. It can display the process data and events of all other sensors and actuators connected to the master. Configuration of the sensors is also possible.

Question 1

What is the difference between E30446 and EIO330?

Accepted Answer

E30446is an inline bluetooth adapter. It is connected between sensor and master and “listens” to the communication. This data is then sent to a smartphone or can be stored. A configuration is not possible. EIO330is connected to the IO-Link master. It can display the process data and events of all other sensors and actuators connected to the master. Configuration of the sensors is also possible.

Question 2

Can EIO330 be used with master display E30443 on the same master?

Accepted Answer

No, this is not possible. Either EIO330 or a master display can be used. Only one IoT core device can be connected to the master at the same time.

Question 3

How many devices can be connected to EIO330 at the same time?

Accepted Answer

Only one device, Bluetooth is usually point to point.

Question 4

Does EIO330 + moneo blue only work in combination with a master, or also without a master?

Accepted Answer

No, it does not work without a master. The app will not continue if no master is found.

Question 5

Is the Bluetooth adapter password-protected?

Accepted Answer

Yes, this is possible to avoid unintentional changes to the parameters. If a password is set up, no one can access this device and the parameters without this password.

Question 6

Does EIO330 work with other IO-Link masters than ifm’s?

Accepted Answer

No, it has to be an ifm IO-Link master.

Question 7

Do sensors which are connected to the master have to be ifm sensors?

Accepted Answer

No, it works with all sensors that support the current IO-Link specification, independent of the manufacturer.

Question 8

Can EIO330 be sold and used anywhere in the world?

Accepted Answer

No, it can’t. We need to have the local radio approval. The supported countries are indicated in the datasheet and certificates can be downloaded in the download section. This will be extended over time.

Question 9

How much process data can EIO330 store?

Accepted Answer

This depends on the data rate, the number of process values a connected sensor provides and on how many sensors are recorded.
Some typical values are given in the following table:

Sensor	Process data out	Data recording time (memory 32 MB, recording rate 500 ms)
	byte	hours	days
PN7071	2	2256	94
TCC501	8	552	23
VVB021	20	216	9
DV1500	6	744	31
TAD981	8	552	23
SM7020	13	336	14
PI2794	2	2256	94
KQ6001	2	2256	94

moneo blue FAQs

Se ha producido un error