Question 1

What is moneo RTM?

Accepted Answer

The state-of-the-art condition monitoring system moneo RTM enables set-up of user-specific dashboards. This gives the user the opportunity to have the plant status at a glance and to acquire important process information. In the event of damage, an alarm message will be sent directly to the user. This makes it possible to react quickly and avoid a possible total failure.

It is also possible to forward this damage report by email to inform corresponding maintenance personnel in good time. Comprehensive data analysis enables reduced downtime, more efficient maintenance planning and cost-optimised production processes. With the analysis function, it is possible to look at historical data in more detail.

Question 2

Can I use RTM without OS?

Accepted Answer

No. To use RTM, you need the operating system. The operating system is moneo OS, which is the basis for moneo modules, like RTM.

Question 3

What are the functions of moneo RTM?

Accepted Answer

moneo RTM is characterised by the following functions:

Monitoring table
Tabular display of process values and status in customised topology
Dashboard (graphical visualisation of applications) with process values and status
Analysis of historical evaluation of process values and status
Adjustable limits and alarms
AVA RAW Data wizard
AVA ISO wizard

Question 4

Can I extend the functions of RTM?

Accepted Answer

Yes, an extension is possible through the “Advanced Vibration Analytics” (AVA). The AVA toolbox contains two components: The AVA wizard for defining vibration monitoring of simple machines according to ISO 10816-3 and the AVA raw data recording for manual or rule-based recording of VVB/VSE raw data.

Question 5

Over what period of time can process values be recorded?

Accepted Answer

The period of data recording depends on the number of process values, the sampling rate and the size of the database.

Example:
With 500 data points, a sampling rate of 1 value/second and a database size of 64 GB, approx. 8 months of data can be recorded. If necessary, the database size can be adjusted depending on the hardware used. In the case of longer data storage, the database must be adjusted in size.

Question 6

What kind of factory machines and plants does moneo RTM support?

Accepted Answer

moneo was developed specifically for condition monitoring of applications in industrial production processes and plants. Machines such as motors, pumps, fans, compressors, compressed air systems and hydraulic units can be monitored. Furthermore, it is possible for larger CIP systems, control cabinets, filters, consumptions and levels to be measured and monitored.

A variety of applications can be monitored and maintained with moneo.
Here you can find the application reports on the use cases already implemented with moneo.

Question 7

What is the AVA ISO wizard?

Accepted Answer

The AVA ISO wizard enables customers with little or no experience of machine vibration monitoring to monitor simple but widely used applications such as pumps, fans and engines (drive units) using a standardised vibration parameter according to ISO 10816-3.

Question 8

What is the AVA RAW Data wizard?

Accepted Answer

Advanced Vibration Analytics raw data recording enables raw data recording for both the VVB and vibration sensors on VSE diagnostic electronics. Raw data recordings can, e.g., serve as a fingerprint or baseline measurement, allow statements about trends or enable detailed damage analysis (see application examples).

There are three ways to trigger raw data recordings.

Manual recording (e.g. for a baseline measurement or for documenting unusual machine conditions)
Rule-based recording, based on a ticket-triggering limit violation
Rule-based recording, based on a fixed time interval

moneo RTM FAQs

Simply set up:
fan vibration monitoring with moneo

Advanced Vibration Analysis

How can I set up the AVA Wizard in moneo?

moneo RTM FAQs

Simply set up: fan vibration monitoring with moneo

Advanced Vibration Analysis

How can I set up the AVA Wizard in moneo?

Simply set up:
fan vibration monitoring with moneo