• Products
  • Markets
  • IIoT & Solutions
  • Company
  • Resources
  • Supply Chain
  • my ifm
  1. Products
  2. Accessories
  3. Antennas
  4. Antennas for diagnosis and remote maintenance
  5. EC3133

combined antenna for WLAN and Bluetooth

EC3133

WLAN/BLE/FAKRA-I Antenna

combined antenna for WLAN and Bluetooth

EC3133

WLAN/BLE/FAKRA-I Antenna

  • For receiving and sending data via WLAN and Bluetooth
  • with integrated amplifier
  • Robust design for use in mobile machines
  • Flat housing for roof mounting on vehicles and mobile machines
Interfaces
WLAN
Frequency band 2400...2480 MHz (802.11b/g/n); 5150...5852 MHz (802.11a/h/j/n/ac)
Type of connector FAKRA
Note on interfaces
VSWR: < 2,0
Antenna gain (2,4 GHz): + 3 dBi
Antenna gain (5,3 GHz): + 1 dBi
Power: < 10 W
Operating conditions
Ambient temperature [°C] -40...85
Protection IP 69K
Tests / approvals
Standard IEC 60068-2-14 Nb; IEC 60068-2-14 Na; IEC 60068-2-3 Db; IEC 60068-2-2; IEC 60068-2-27; ISO 16750-2; EN 45545-2; ECE R 118
Mechanical data
Weight [g] 105.85
Type of mounting screw mounting; (M16 x 1,5)
Dimensions [mm] Ø 76 / L = 23
Tightening torque [Nm] 5
Remarks
Remarks
When mounting the antenna(s) in vehicles avoid the vicinity of fuel tanks, vessels with explosives or insufficiently screened electronic components.
Do not install antenna inside closed metal construction (e.g. in driver's cabin).
Clean the mounting surface before the installation.
Do not extend or shorten antenna cable.
Avoid direct exposure to steam or high-pressure cleaning during car wash.
Radio communication can affect the function of electronic devices that are not correctly shielded.
Contact the manufacturer of the corresponding device in case of any interference.
Pack quantity 1 pcs.
Electrical connection - WLAN / Bluetooth
Cable: 2 m
Connector: FAKRA I
Diagrams and graphs
Funkdiagramm
measured with a 0.6 m cable on a base area of 300 mm x 300 mm
Funkdiagramm
measured with a 0.6 m cable on a base area of 300 mm x 300 mm