- Products
- Sensors
- Flow sensors / flow meters
- Flow meter for compressed air and industrial gases
- SD8100
industrial gas counter
SD8100
SDR11DGXFPKG/US-100
industrial gas counter
SD8100
SDR11DGXFPKG/US-100
- Precise measurement of flow, consumption and medium temperature
- High accuracy, repeatability and measurement dynamics
- For detecting argon (Ar), carbon dioxide (CO2), nitrogen (N2)
- With switching output, analog output and pulse output
- Clearly visible numerical display
- Convenient operation via buttons or parameter setting via IO-Link
Article to be discontinued
Discontinuation date: 12/31/2024
Discontinuation date: 12/31/2024
Alternative articles: SD8600 Product comparison: SD8100 / SD8600 When selecting an alternative article and accessories please note that technical data may differ!
Product characteristics
Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
---|---|
Process connection | threaded connection R 1 DN25 |
Measuring range [m³/h] | 1.2...366.6 |
---|
Measuring range [m³/h] | 0.8...223.6 |
---|
Measuring range [m³/h] | 0.8...225 |
---|
Application
Application | for industrial applications |
---|---|
Media | Argon (Ar); carbon dioxide (CO2); nitrogen (N2) |
Medium temperature [°C] | 0...60 |
Pressure rating [bar] | 16 |
Pressure rating [MPa] | 1.6 |
Electrical data
Operating voltage [V] | 18...30 DC |
---|---|
Current consumption [mA] | < 100 |
Protection class | III |
Reverse polarity protection | yes |
Power-on delay time [s] | 1 |
Inputs / outputs
Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
---|
Outputs
Total number of outputs | 2 |
---|---|
Output signal | switching signal; analog signal; pulse signal; IO-Link; (configurable) |
Electrical design | PNP |
Number of digital outputs | 2 |
Output function | normally open / closed; (configurable) |
Max. voltage drop switching output DC [V] | 2 |
Permanent current rating of switching output DC [mA] | 250; (per output) |
Number of analog outputs | 1 |
Analog current output [mA] | 4...20; (scalable) |
Max. load [Ω] | 500 |
Pulse output | consumed quantity meter |
Short-circuit protection | yes |
Type of short-circuit protection | yes (non-latching) |
Overload protection | yes |
Measuring/setting range
Low flow cut-off LFC [m³/h] | < 3.8 |
---|
Measuring range [m³/h] | 1.2...366.6 |
---|---|
Display range [m³/h] | 0...440 |
Resolution [m³/h] | 0.2 |
Set point SP [m³/h] | 3.4...366.6 |
Reset point rP [m³/h] | 1.8...365 |
Analog start point ASP [m³/h] | 0...293.2 |
Analog end point AEP [m³/h] | 73.4...366.6 |
In steps of [m³/h] | 0.2 |
Measuring range [m³/h] | 0.8...223.6 |
---|---|
Display range [m³/h] | 0...268.2 |
Resolution [m³/h] | 0.2 |
Set point SP [m³/h] | 2...223.6 |
Reset point rP [m³/h] | 1...222.6 |
Analog start point ASP [m³/h] | 0...178.8 |
Analog end point AEP [m³/h] | 44.8...223.6 |
In steps of [m³/h] | 0.2 |
Pulse value | 0.001...3 000 000 Nm³ |
---|---|
In steps of | 0.001...1000 Nm³ |
Pulse length [s] | 0,004...2 |
Measuring range [m³/h] | 0.8...225 |
---|---|
Display range [m³/h] | 0...270 |
Resolution [m³/h] | 0.2 |
Set point SP [m³/h] | 2.2...225 |
Reset point rP [m³/h] | 1...224 |
Analog start point ASP [m³/h] | 0...180 |
Analog end point AEP [m³/h] | 45...225 |
In steps of [m³/h] | 0.2 |
Measuring range [°C] | 0...60 |
---|---|
Display range [°C] | -12...72 |
Resolution [°C] | 0.2 |
Set point SP [°C] | 0.4...60 |
Reset point rP [°C] | 0...59.8 |
Analog start point [°C] | 0...48 |
Analog end point [°C] | 12...60 |
In steps of [°C] | 0.2 |
Accuracy / deviations
Repeatability [% of the measured value] | ± 1,5 |
---|---|
Accuracy (in the measuring range) | ± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533; installation in pipes: DN25) |
Accuracy [K] | ± 2; (medium flow in the limit area of the flow measurement range) |
---|
Reaction times
Response time [s] | 0.1; (dAP = 0) |
---|---|
Damping process value dAP in steps [s] | 0 - 0,2 - 0,4 - 0,6 - 0,8 - 1 |
Software / programming
Parameter setting options | Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection |
---|
Interfaces
Communication interface | IO-Link | ||||
---|---|---|---|---|---|
Transmission type | COM2 (38,4 kBaud) | ||||
IO-Link revision | 1.1 | ||||
SDCI standard | IEC 61131-9 | ||||
Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||
SIO mode | yes | ||||
Required master port class | A | ||||
Process data analog | 3 | ||||
Process data binary | 2 | ||||
Min. process cycle time [ms] | 4.1 | ||||
Supported DeviceIDs |
|
Operating conditions
Ambient temperature [°C] | 0...60 |
---|---|
Storage temperature [°C] | -20...85 |
Max. relative air humidity [%] | 90 |
Protection | IP 65 |
Tests / approvals
EMC |
|
||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CPA approval |
|
||||||||||||||||||||
Vibration resistance |
|
||||||||||||||||||||
MTTF [years] | 224 | ||||||||||||||||||||
Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
Weight [g] | 2029 |
---|---|
Material | PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminum powder-coated |
Materials (wetted parts) | stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK-GF30; polyester; aluminum |
Process connection | threaded connection R 1 DN25 |
Displays / operating elements
Display |
|
||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Display unit | Nl/min; Nm³/h; Nm³; °C |
Remarks
Remarks |
|
|||
---|---|---|---|---|
Pack quantity | 1 pcs. |
Electrical connection
Connection | Connector: 1 x M12; coding: A |
---|