Application
Application |
hygienic and wet areas in the food industry |
Electrical data
Operating voltage [V] |
26.5...31.6 DC |
Max. current consumption from AS-i [mA] |
450 |
Reverse polarity protection |
yes |
Inputs / outputs
Number of inputs and outputs |
Number of analogue inputs: 4 |
Inputs
Sensor supply of the inputs |
AS-i |
Number of analogue inputs |
4; (connection of 2-wire, 3-wire and 4-wire sensors) |
Analogue input (current) [mA] |
4...20 |
Analogue input (voltage) [V] |
18...30 |
Max. voltage drop across load for nominal voltage [V] |
10 |
Resolution of analogue input |
1 bit = 1 µA |
Precision analogue input [%] |
0,5 |
Operating conditions
Ambient temperature [°C] |
-5...70 |
Storage temperature [°C] |
-25...85 |
Max. relative air humidity [%] |
90; (linearly decreasing to 50 % (40 °C) non condensing) |
Max. height above sea level [m] |
2000 |
Protection |
IP 68; IP 69K |
Pollution degree |
2 |
AS-i classification
AS-i version |
2.11; 3.0 |
Extended addressing mode |
no |
AS-i master profile |
M3; M4 |
AS-i profile |
S-7.3.E |
AS-i I/O configuration [hex] |
7 |
AS-i ID code [hex] |
3.E |
AS-i certificate |
101108 |
Mechanical data
Weight [g] |
625 |
Dimensions [mm] |
Ø 137.3 / L = 80 |
Materials |
threaded bush: stainless steel (316L/1.4404); LED-Fenster: PC; O-ring: EPDM; Protective cap: PP |
Displays / operating elements
Display |
analogue signal |
LED, yellow channels AI1...AI4 |
operation |
LED, green AS-i |
errors |
LED, red |
|
Accessories
Accessories (optional) |
Protective cap: M12, E70297 |
Flat cable insulation displacement connector:, E70455 |
Torque wrench:, E70390 |
|
Remarks
Remarks |
When the sensors and actuators are supplied from AS-i the load must not exceed a maximum of 380 mA. |
The load for an individual sensor connection must not exceed 200 mA. |
When connecting a 2-wire or 3-wire sensor without own supply there has to be an external link between pin 3 and pin 4. |
The inputs (pins 2 and 4) are electrically separated and have no connection to AS-i. |
The sensor supply (pins 1 and 3) is electrically connected to AS-i. |
MEW = % of the final value of the measuring range |
|
Pack quantity |
1 pcs. |
Electrical connection - AS-i
|
Connector: 1 x M12; coding: A; Tightening torque: 1.2...1.4 Nm |
Electrical connection - Process connection
|
Connector: 4 x M12; coding: A; Tightening torque: 1.2...1.4 Nm |